The premise of the normal operation of the chiller is that the water circulation, refrigerant circulation and electronic control system need to be kept normal. If there is a problem on the one hand, the chiller will not work normally, affecting production. At the connection, solving it early is conducive to the normal operation of the chiller.
Let's take a look at the causes and solutions of water leakage in the chiller.
The water circulation system of the chiller is composed of the water inlet pipe, the evaporator, the water outlet pipe, the water tank, the chilled water pump, the cooling water pump, the condenser, and the pipes and valves at each connection. If there is a water leakage fault, the above-mentioned parts are basically indispensable. Let's take a look at the water leakage of the chiller. solution.
(1) Water leakage at the inlet and outlet of the chiller is generally caused by loose or ruptured bolts at the connection, which can be repaired or replaced;
(2) If the evaporator shell of the chiller is leaking, it is necessary to check whether there is water seepage at the welding part of the evaporator shell, and if so, it should be repaired by welding;
(3) There is water leakage at the float valve of the chiller. The float valve controls the switch of the inlet valve according to the buoyancy. The solution is to check and adjust the position of the ball valve. If it is damaged, it should be replaced and repaired.
(4) If the water tank of the chiller is too full, the cooling water fluctuates and leaks during operation. The solution is to reduce the water level in the water tank;
(5) The water tank of the chiller is leaking, which may be due to the corrosion of the welding position of the water tank, causing water leakage, which needs to be re-welded and repaired;
(6) Water leakage occurs at the water pump of the chiller. Generally, the shaft seal at the water pump is not well connected or damaged. It is enough to replace the shaft seal of the water pump;
(7) Water leakage occurs in the perforation of the condenser inside the chiller. The solution is to find the fault point and repair it;
If the chiller is tilted for a long time, the valves and pipes of the chiller will be unevenly stressed, damaged, and cause water leakage. The chiller should be placed horizontally according to the specifications.

