In normal application, the refrigerator needs to be cleaned and cleaned regularly and scientifically. This is also an indispensable part of maintenance, mainly the condenser, evaporator, various pipelines, etc., condenser and evaporator The condensers, especially the water-cooled condensers and evaporators, must be cleaned and cleaned regularly. This is undoubtedly. Air-cooled condensers and evaporators do not directly contact the cooling water on the outer layer, so they only need to pay attention to dust. In terms of cleaning and cleaning, compared to scale, air-cooled condensers and evaporators are actually easier to clean and clean. Can pickling be applied to industrial refrigerators?
It is certain that pickling can be used as a cleaning method, but the dilution degree of the acid and the type of acid need to be considered. Fundamentally, almost all condensers can be cleaned by pickling. Way to clean. In addition, you also need to consider whether the parts of the freezer you want to clean are a certain part or the cyclic operation of the entire system to clean and clean. These two aspects are completely different.
If cleaning and cleaning are performed in a cyclic operation, it is necessary to ensure that the system is completely shut down, and the cleaning pump, the liquid distribution tank, and the related valves of the refrigerator must be connected. If it is to be cleaned separately, the condenser must be removed, and then the diluted acid solution must be added to it, and it must be filled up to achieve the corresponding cleaning effect. The reason why the freezer needs to be cleaned is that there are many parts in the chiller that will affect the normal operation of the entire freezer. Because these parts are cyclical parts, they belong to a cycle of the freezer and must be guaranteed to operate normally.
