1. Distinguish the actual cause of water cut-off
The cause of water cut-off fault caused by industrial chillers is different, so in the case of solving the fault, the first step is to analyze the actual cause of water cut-off. If there is a problem because of water resources, only the supply of water resources must be repaired immediately, then the operation of industrial chillers can be repaired. If it belongs to the fault of water pump, then we must carry out all-round maintenance and maintenance for the machinery and equipment, remove the fault of water pump immediately, and carry out all-round detection in addition. Only when the water pump is back to work can the industrial chiller be turned on normally.
2. Shut down the machine immediately for maintenance until the water yield recovers
In the case of maintenance of industrial water chiller, be sure to shut down and carry out practical operation. Because the industrial cold water in operation causes a large amount of heat, it will shut down in 10 minutes. Therefore, to carry out maintenance and inspection in the case of shutdown can prevent additional high temperature. The key is to ensure that the industrial water chiller is in all normal operating temperature range, which can ensure that the industrial water chiller is in all normal operating conditions.
There is no need to panic when encountering all kinds of faults of water chillers. The direct cause of the failure can be found through careful analysis of the industrial water chiller by using professional machinery and equipment. Then, according to their own actual working ability, make appropriate maintenance plan, in the least time, to ensure that the industrial water chiller runs again.
Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.
In order to comprehensively improve the market competitiveness of the company,we made efforts with the United States “Copeland” company for technical cooperation,and imported a variety of new production equipment,from Europe,the United States,such as high quality materials,so that the product quality can be a strong guarantee!We can provide customers with more safety, precision, energy saving, environmental protection,cost-effective products and considerate after-sales service,products sold throughout the country,and exported to Arab,African,Russia,Vietnam,Malaysia and other southeast Asian countries and Europe and the United States.
