In the maintenance process of the chiller, the following 6 steps are very important:
The first one: It is necessary to check the foot of the compressor and whether the entire chiller is firmly fixed during maintenance.
Noise and vibration problems will occur. If the fixing is not secure, the noise and vibration problems are not just superficial problems. It can also cause and cause the compressor or the entire chiller to malfunction.
No. 2: The quantity and quality of refrigerant must be checked frequently.
The refrigerant is the basis of the entire chiller refrigeration system. The refrigerant is the medium of refrigeration. If the amount of refrigerant is leaked, missing or there is a quality problem, then the entire chiller will not be able to operate normally!
No. 3: When maintaining, one more important thing is to check for any leaks.
Leakage is not a certain aspect. Leakage refers to whether there is leakage of refrigerant, cooling water, etc., whether it is refrigerant or cooling water, leakage will cause various problems.
The compressor may also have leakage problems, which may be caused by the refrigerated lubricating oil used in the working cavity of the compressor not being able to effectively seal the compression cavity of the compressor!
No. 4: There is another more important point, that is the order of switching on and off.
For anyone with a certain amount of work experience, they know that the chiller switch is in order!
No. 5: The chiller should not be turned on and off frequently. Try to turn it on when you want to use it, and turn it off when you are sure to turn it off.
Frequent starting of the chiller will cause problems such as reduced efficiency, reduced life, and increased failure rate!
Number 6: We should also pay attention to whether the working status of each instrument is normal.
There are many instruments on the chiller, including temperature and pressure instruments. Make sure that these instruments work properly to make the entire chiller work properly.
Nanjing RICOM Refrigeration Equipment Co., Ltd. is a manufacturer specializing in industrial temperature control technology for 20 years. It implements modern quality management system S09001: 2008 and environmental system IS014001: 2004 standards to ensure that the enterprise team continues to be in the technical field Innovation, focus on customer use and satisfaction, unanimously recognized by the industry and customers.
