Customers often come to inquire about the problems of industrial chillers. After the analysis and collation of Nanjing RICOM refrigeration, it is the consequence of improper use. We had to go back to the root cause, so there was a problem in the company's tutorial, which failed to convey the real operation method to the customers. Here are a few examples of improper use:
The chiller works slowly when it is turned on:
This is a very common problem, and it may not start. What is the reason for this? Other encounter this situation, first check the power supply problem, whether the voltage is insufficient, this is a big reason. Secondly, because some valves are not closed or opened, they should be opened in order, which is usually indicated. However, some novices do not operate properly, which leads to very slow action when starting.
The industrial water chiller is hot when it works:
Improper operation and other conditions will cause the chiller to heat when it is working. At this time, it may be the working load of the chiller. You should check the displayed data in time and make adjustments. If it is not solved, restart it and check the opening and closing of each valve. The most important point is the data displayed on the screen, which often has deviation due to improper operation.
The chiller vibrates heavily or makes noise:
When the industrial water chiller works, it is fixed in the working area. However, there is a lot of vibration and noise, and most of the cases are overload. Therefore, in addition to observing the screen data and various switches, it is also necessary to stop the operation of the equipment for a short time before starting.
Input value of chiller cannot be adjusted:
The output value of the data on the screen is abnormal, which can not reach normal conditions. Here, there may be a little air leakage in the equipment during operation. Check whether there is any problem with the interfaces of each equipment in time.
The above are several cases of improper use of the industrial chiller of Nanjing RICOM refrigeration. Originally, this is a small problem that should be mentioned in the training of customer staff. Of course, it is easy to forget when operating, so we must keep these points in mind.
Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.

