1. The industrial water chiller undergoes a 100% performance test before leaving the machine to ensure the normal operation of the unit. If this problem occurs during the first use, it may be caused by the wrong type of chiller or a problem during transportation.
2. The temperature of the industrial chiller cannot be lowered when the industrial chiller is used for the first time. Another reason is that there is a small problem in the installation between the water-cooled chiller and the cooling tower, circulating water pump, and pipeline, which requires careful investigation according to the installation diagram.
3. If this happens to a chiller that has been used for half a year or 1-2 years later, it may be due to the following problems:
(1). The heat exchanger of the water-cooled chiller is too dirty. It is recommended to clean the heat exchanger and clean it regularly during subsequent use.
(2). Freon leakage in the refrigeration system of the chiller, it is recommended to find the leakage point, repair welding, and add refrigerant;
(3). It is possible that the temperature of the environment where the chiller is located is relatively harsh, too high or too low, which causes the chiller to fail to meet the requirements. In this case, the requirement can only be met by choosing a larger chiller.
4. It may be that the water source used has impurities, which have been accumulated in the pipes between each equipment for a long time, resulting in a small water flow. Therefore, it is necessary to clean the pipes between the equipment.

