First,according to the cooling method, the chiller can be divided into two types: air-cooled chiller and water-cooled chiller:A.The air-cooled chiller mainly uses the fan to heat the aluminum foil fin condenser. The condenser usually adopts the axial-flow upward blowing method.The advantages of the device are simple, which can only connect the import and export of ice water, and it is suitable for the areas with inconvenient water use or lack of water resources;B.The water-cooled chiller is mainly used to heat the shell and tube condenser through water, and cooling water tower is required,compared with the air-cooled chiller, the water-cooled chiller does not need a fan, and its energy consumption is superior to that of the air-cooled chiller.And the heat transfer efficiency is higher than that of the air-cooled chiller, so the cooling capacity of the water-cooled chiller is slightly higher than that of the air-cooled chiller.
Second,according to the construction method of water chiller, it can be divided into vortex chiller and screw chiller:Of course, the compressor is not only scroll type and screw type.Today, I will briefly introduce these two methods:A.The scroll chiller is first named for the selection of scroll type condensing refrigerant for its condensing machine, which makes it reach the refrigeration effect through gas-liquid transformation. It is in the leading position in the current chiller market, with outstanding quality and extremely low failure rate;B.The screw type water chiller is first named after the use of screw tightening refrigerant and then refrigeration. Li Desheng Machinery Co., Ltd. selects Taiwan Hanzhong screw as the central part of the water chiller.Second, the main engine adopts the international advanced third generation 5:6 asymmetric semi closed screw compressor. The motor and the compressor are integrated. There is no worry about the leakage of the shaft seal. The unit can operate for 40000 hours without failure. The unit can implement intelligent program control according to the needs of the load to avoid the impact on the power grid.
Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.
In order to comprehensively improve the market competitiveness of the company,we made efforts with the United States “Copeland” company for technical cooperation,and imported a variety of new production equipment,from Europe,the United States,such as high quality materials,so that the product quality can be a strong guarantee!We can provide customers with more safety, precision, energy saving, environmental protection,cost-effective products and considerate after-sales service,products sold throughout the country,and exported to Arab,African,Russia,Vietnam,Malaysia and other southeast Asian countries and Europe and the United States.
