Maintenance plan for common faults of water chiller without water supply

  Apr 27, 2021

  Leave a message

 

1. Distinguish the detailed reasons for water cut-off

The reasons for the common failures of water chillers are different. Therefore, in the case of solving the common failures, we need to first analyze the detailed causes of water stoppage. If because water resource supply is insufficient, just need to restore water resource supply can repair the operation of chiller. If it belongs to the common faults of submersible pumps, it is necessary to carry out comprehensive maintenance and maintenance for the machinery and equipment, remove the common faults of submersible pumps immediately, and carry out comprehensive inspection. Only when the submersible pump is restored can the chiller be started normally.

2. Shut down the machine immediately for maintenance until the water yield recovers

It is necessary to shut down the chiller for maintenance. Because the cold water in operation causes a large amount of heat, it will shut down for 10 minutes. Therefore, to carry out maintenance and inspection under the condition of shutdown can prevent additional high temperature and ensure the normal operation of the chiller.

There is no need to panic when encountering various common faults of water chillers. The use of professional machinery and equipment for the chiller to carry out careful analysis, can find the direct cause of common faults. Then, according to their own detailed work ability, formulate appropriate maintenance plan, in the least time, to ensure that the chiller operation again.

Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.

 

In order to comprehensively improve the market competitiveness of the company,we made efforts with the United States “Copeland” company for technical cooperation,and imported a variety of new production equipment,from Europe,the United States,such as high quality materials,so that the product quality can be a strong guarantee!We can provide customers with more safety, precision, energy saving, environmental protection,cost-effective products and considerate after-sales service,products sold throughout the country,and exported to Arab,African,Russia,Vietnam,Malaysia and other southeast Asian countries and Europe and the United States.

Send Inquiry
Send Inquiry