The function of the condenser equipped with any chiller will be gradually reduced as soon as it is used for a long time. As a result, the condensation pressure of the system will be higher than that of the normal operation. In order not to reduce the properties of the condenser, it is necessary to protect and maintain the condenser regularly.
There are mainly two kinds of condensers used in small refrigeration equipment: air-cooled condenser and water-cooled condenser. According to the different types of condensers, the ways to clean the scale are also different. Here are two kinds of common condenser protection and maintenance: 1. Air cooled condenser uses air as the cooling medium, because there are often dust in the air, some dust will stick to the surface of the condenser fins, and the heat dissipation effect of the condenser will become worse after a long time, Especially in the poor environment, it should be cleaned regularly. Clean method is: pure dust can be blown clean with compressor air, if dirt is more, should choose the cleaner that does not corrode action to clean radiating tube and fin, achieve the intention that improves radiating effect. 2. On the water-cooled condenser, the main problem is to remove scale. The eradication cycle depends on the water quality, and those with poor water quality should be cleaned at least once a year; If the water quality is good, it can be cleaned once every 2-3 years.
Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.
In order to comprehensively improve the market competitiveness of the company,we made efforts with the United States "Copeland" company for technical cooperation,and imported a variety of new production equipment,from Europe,the United States,such as high quality materials,so that the product quality can be a strong guarantee!We can provide customers with more safety, precision, energy saving, environmental protection,cost-effective products and considerate after-sales service,products sold throughout the country,and exported to Arab,African,Russia,Vietnam,Malaysia and other southeast Asian countries and Europe and the United States.
