Five lubrication methods of compressor in industrial water chiller

  May 12, 2021

  Leave a message

 

We all know the principle of industrial chiller compressor. The compressor sucks the low-temperature and low-pressure refrigerant gas in the evaporator into the compressor body. It goes through the compressor to increase the pressure and temperature of the refrigerant gas, and then enters the cooler. In the cooler, the high-temperature and high-pressure refrigerant gas exchanges heat with the cooling water or air to transfer heat to the cooling water or air, The refrigerant gas is exothermic and condensed into liquid.

The high pressure refrigerant liquid enters the evaporator after depressurizing through the throttle valve. In the evaporator, the low-pressure refrigerant gas absorbs the heat of the refrigerant water and gasifies. At the same time, it reduces the temperature of the refrigerant water and becomes the chilled water of the required heater. According to the characteristics of compressor structure, refrigeration equipment can be lubricated in different ways. There are five lubrication methods for industrial chillers:

Oil drop lubrication

Use the oil cup and oil pipeline to send the lubricating oil to the parts that should be refueled, or fill the lubricating oil with the oil pot on time. (Variable frequency chiller)

Pressure lubrication

This method is used in both large and medium compressors with crosshead. (Air cooled chiller)

Injection lubrication

The injected oil mist will follow the gas into the cylinder and other lubrication places, such as super vane compressor, high-pressure compressor and screw compressor. (Ice machine)

Oil ring lubrication

The rotating shaft is used to drive the oil ring on the shaft, and the oil ring brings the oil in the oil pool into the bearing for circulating lubrication. (freezer)

Splash lubrication

The oil is splashed to the lubricating parts by the rod mounted on the connecting rod, so the cylinder and the motion mechanism can only use the same kind of lubricating oil. This method is mostly used in small compressor without crosshead. But its oil is not easy to filter and operate, so the oil level of industrial chiller must be strictly controlled.

Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.

In order to comprehensively improve the market competitiveness of the company,we made efforts with the United States “Copeland” company for technical cooperation,and imported a variety of new production equipment,from Europe,the United States,such as high quality materials,so that the product quality can be a strong guarantee!We can provide customers with more safety, precision, energy saving, environmental protection,cost-effective products and considerate after-sales service,products sold throughout the country,and exported to Arab,African,Russia,Vietnam,Malaysia and other southeast Asian countries and Europe and the United States.

Send Inquiry
Send Inquiry