Industrial water chiller is a kind of auxiliary equipment for industrial production with refrigeration as the main purpose in the process of work, which can provide great help to various industrial production when in use. Industrial water chiller is a mold temperature machine with heat transfer oil as the heat transfer medium. The mold temperature machine comes from a storage tank. The oil temperature machine mainly plays the role of preheating and constant temperature in the nine rollers. When working, the heat transfer oil enters the system from the storage tank and is pumped into the mold or other equipment that needs to control the temperature through the circulating pump. The heat transfer oil of the oil temperature machine comes out from the controlled equipment and then returns to the system.
During the operation of industrial chiller, the formation of refrigeration effect needs the help of effective refrigeration design inside the equipment. The heat transfer oil of the industrial air-cooled chiller is heated by the heater. When the medium temperature detected by the temperature probe reaches the set value, the heater stops working. When the temperature of the oil heater is lower than the set value, the heater starts to work. When the temperature of the oil heater reaches the set value, it stops working. In this way, we can achieve the requirements of refrigeration.
The cooler of industrial chiller is a kind of auxiliary equipment for production and processing. To a certain extent, it is more and more in line with the trend of the times. As an industrial country, China has a perfect industrial foundation and complete production chain. In this chain, it depends more and more on product quality, process and production efficiency. In today's fast-paced industrial processes, industrial chillers are used in everything from light industrial injection molding, textile and food processing to heavy industrial machine tools, special vehicles and shipbuilding. Cooling is the slogan of productivity. Industrial water chillers have been widely used, and their use frequency must be quite high.
The cooling unit of industrial chiller is called shell and tube condenser. The cooling water flows through the condenser tube layer and is connected with the cooling tower. In winter, the cooling water in the cooling tower needs to add appropriate antifreeze. Combined with local temperature, avoid freezing the ground, so as to avoid freezing the cooling tower at night. Shut down for a long time, discharge water from the condenser of the cooling tower and keep the drain valve open. If the cooler is outside, it needs to be drained when it is shut down at night.
First, cooling is the cooling system of the unit itself. Air cooling cooler, known as wing condenser, does not require water contact and can be cleaned during daily maintenance. So don't explain too much.
There is no difference among refrigeration system, air cooling system and water cooling system. If the industrial chiller is placed indoors at a temperature of not less than 0 degrees per day, it can thaw. If the freezing temperature outside the refrigerator or every day is lower than freezing point, attention should be paid to heat preservation and freezing. The key is that unless the cooling water used by the equipment can be added with an appropriate amount of antifreeze, and the local temperature is not lower than the freezing point of antifreeze, the water must be discharged during shutdown. Otherwise, you must turn off all equipment and open all drain valves.
Nanjing RICOM Refrigeration Equipment Co.,Ltd is an industry-trade integrated manufacturers for 20 years,who is engaged in the industrial temperature control technology,implements the modern quality management system ISO9001:2008 and ISO14001 environment system:2004 standard,to ensure enterprise team in technology innovation,we pay attention to customers' sense of use and satisfaction, and get the consistent recognition of the industry and customers;obtained AAA credit rating certification.In 2016, it was awarded as a contract abiding and trustworthy enterprise.In 2013,the company established the production base of chiller and mould tempering machine in Chuzhou RICOM plastic technology Co.,Ltd.